Equipment

STEEL CUTTING AND HEATING EQUIPMENT 100% FLAME TESTED

Mach 1 Cutting Tips

Scrap Cutting Tips

GAS INNOVATIONS maintains a complete inventory of cutting, heating and fuel gas regulators designed specifically for propylene. With our cutting tips, you can see the difference – Nickel/Chrome plated solid copper shells and the latest technology with…

Mach 1 Cutting Tips

Mach 1 cutting tips are designed to enhance fuel gases for hand or machine cutting. With the Mach 1 cutting tip, higher steel cutting speeds are obtained, there is a narrow kerf width, and it will last 3 to 5 times longer than other tips in the industry today. The unique stainless insert for the cutting oxygen provides a jet stream to cut 2″ to 6″ off the plate. Watch the video here.


The Ripper Tip

The Ripper Tip

The Ripper Tip is the fastest cutting scrap tip, and it is also the best bevel cutting tip. Its unique design with coarse splines, a heavy solid copper shell, and stainless insert allows this tip to cut through rust, paint, and titanium. It’s extremely fast and efficient, reducing cutting and bevel cutting times in half. See more applications and videos here.


HD Series Tips

HD Series Tips

Propylene Heating

You can expect to reduce your heating times in half when using MACH 1 HD propylene tips.
Mach 1 Heating Tips


HVAC AND PROPYLENE EQUIPMENT

Gas Innovations has the economical solution for the rising cost of Acetylene. When changing from Acetylene to Propylene typically you can use your existing regulators, tips, and equipment; however, it is recommended to use T-Grade Hose and Propylene tips and change regulators when it comes time for replacement.

Gas Innovations has created the ability to purchase individual components shown below and in our equipment catalog. The combination of separate mixers, goosenecks and tips reduces your inventory and makes it more cost-efficient. This equipment replaces your old equipment when it comes time to upgrade to Propylene equipment.

New 8 lbs. Propylene “B” tank replacement allows you to easily solder and braze without oxygen. See video.

  • 3.5 times more product
  • You use all of the product – no residual gas leftover, no filler, and no acetone.
  • Lighter than Acetylene “B” tank
  • More contractor installs and less inventory
  • 20 times more stable than Acetylene
  • Same physical cylinder dimensions as a “B” tank
Tank Replacement

PROPYLENE REGULATORS

VSR-461-510
Heavy duty fuel gas
Stainless steel diaphragm
Mechanical seat
CGA 510
2 1/2" gauges
VSR-261-510
Medium duty fuel gas
Reinforced neoprene diaphragm
Mechanical seat
CGA 510
2" gauges
propylene regulators

PROPYLENE FLASHBACK ARRESTORS

Gas Innovations Flashback Arrestors provide protection against dangerous reverse gas flow and flashbacks in accordance with EN 730 / ISO 5175-1. They are 1003 tested, use Viton seals and have higher flow rates than other flashback arrestors.

A built-in temperature-sensitive cut-off valve extinguishes sustained flashbacks long before the internal temperature of the arrestor reaches a dangerous level. A spring-loaded non-return valve prevents slow or sudden reverse gas flow, forming explosive mixtures in the gas supply.

R53N GIW53PR
  • Regulator (87 PSI) flow rate
  • B connection-regulator mount flow rate
  • Viton (EDPM) seals for fuel gases
  • Temperature-sensitive-thermal cut-off valve
  • ISO 5175 certified and conforms to OSHA and NFPA
  • ANSI, Z49 and UL approved for Propylene
85-10 GIW851 OPHR
  • High flow heating and scrap cutting applications
  • B connection – regulator (101 PSI) flow rate
  • Viton (EDPM) seals for fuel gases
  • Temperature-sensitive-thermal cut-off valve
  • ISO 5175 certified and conforms to OSHA and NFPA
  • ANSI, Z49 and UL approved for Propylene
85-20 GIW8520PPL
85-30 GIW8530PPL

8530 is ideal for flame spray HVOF applications and the 8520 is recommended for bulk tank installations.

  • High flow applications from bulk tanks (101 PSI)
  • 3/411 NPT (85-20) or 111 (85-30)
  • Viton (EDPM) seals for fuel gases
  • Temperature-sensitive-thermal cut-off valve
  • ISO 5175 certified and conforms to OSHA and NFPA
  • ANSI, Z49 and UL approved for Propylene
propylene flashback arrestors